infrared receiver

英 [ˌɪnfrəˈred rɪˈsiːvə(r)] 美 [ˌɪnfrəˈred rɪˈsiːvər]

红外线接收机;红外探测器

电力



双语例句

  1. The infrared signal generated by a remote controller is accepted by an infrared receiver header and decoded by a microprocessor to realize the corresponding function.
    遥控器产生的红外信号,由红外接收头接收,经微处理器解码实现相应功能。
  2. A Miniature Fish-like Robot with Infrared Remote Receiver and IPMC Actuator Fabrication and Properties of Ag Based IMPC Flexible Actuator
    基于IPMC驱动器的小型遥控机器鱼的研制Ag型IPMC柔性驱动器的制备及性能
  3. The source for infrared receiver, from the port to the received infrared data.
    实现红外接收的源码,能够从端口获得所接收到的红外数据。
  4. Intelligent photoelectric switch based on infrared receiver module
    基于红外接收模组的智能光电开关设计
  5. The design of quality inspection system of infrared remote receiver based on FPGA
    基于FPGA的红外接收头质量检测系统设计
  6. Selection of active outdoor infrared detectors, active infrared transmitter sent a bouquet of the infrared beam by the modulation, into the infrared receiver to form a cordon.
    室外选用主动式红外探测器,主动红外发射器发出一束经调制的红外光束,投向红外接收器,形成一条警戒线。
  7. Infrared beams form a virtual barrier between transmitter and receiver columns, creating a continuous wall that is invisible to the naked eye.
    红外光束在发射塔和接收塔之间形成一个隐形屏障,所生成的连续墙是肉眼看不见的。
  8. The transmitter transforms the measurement of temperature sensor into infrared signals, which are scanned by the infrared camera of receiver.
    发射端把测温传感器测得的温度量转化为红外信号并发射;接收端的红外监控摄像机对传感器扫描接收;
  9. Because infrared laser is a line-of-signal technology, the transmitter and receiver must be carefully aligned.
    由于红外激光是视线技术,发射机和接收机必须仔细对准。
  10. In this paper, the principle of an infrared receiver chip is analyzed and a novel circuit is proposed for the main module.
    分析了红外接收芯片的原理,对主要模块提出了较新颖的实现电路。
  11. Design of Infrared Remote-control Receiver Based on Input Catch
    基于输入捕捉的红外遥控接收器设计
  12. This paper presented a comprehensive physics experiment for measuring the acceleration of a spring vibrator by infrared telemetering method. It consists mainly of a force sensor, V/ F and F/ V converters, a infrared transmitter and receiver.
    介绍我们新开发的一个综合性实验,它主要包括拉力传感器、由LM331组成的V/F和F/V变换电路以及红外发射和接收装置等,以实现对弹簧振子加速度的红外遥测。
  13. This paper introduces infrared-control intelligent lock in code, which is a advanced code switch. The infrared-transmitter send information and the receiver accept the information. After magnified, CPU can identify and dispose the information.
    红外线遥控智能密码锁是一种比较先进的密码开关,由红外线发射机发射信号,接收机接收信号,然后经放大电路,再由CPU对其进行识别、处理,从而实现智能控制的遥控密码锁的功能。
  14. Design of Band Pass Filter Using in Infrared Remote Receiver
    红外遥控接收器中带通滤波器的设计
  15. Design and Implementation of a Second-Order Bandpass Filter for Infrared Receiver
    一种用于红外接收前端的二阶带通滤波器
  16. The connecting circuit of infrared signal receiver of monolithic circuit computer 8031 is shown. The software of command signal of remote-controller and the principle, method of eliminating disturbing signal by soft and hard wares are described.
    本文介绍红外线遥控器操作单片机8031的红外信号接收器的连结电路,阐述遥控指令信号的软件和从软件硬件上排除干扰信号的原理、方法,并给出相应的程序。
  17. To implement the hardware of water meter system, this paper mainly introduces the communication circuit of PC, the circuit of infrared emitter and receiver, the power module etc.
    从上位PC机通信电路、红外发送与接收电路以及电源模块等几个方面详细介绍了该水表系统硬件部分的实现方法。
  18. In the device, the infrared emitter and receiver are used to collect the input signal.
    它采用红外发射管和红外接收管采集输入信号。
  19. Also, a new type of uncooled FPA imaging technique& micro-optomechanical infrared receiver with optical readout is briefly introduced.
    简要提及一种新颖的非制冷焦平面成像技术:光学读出微光机红外接收器。
  20. The new optimeter is made up of the following parts: power supply, remoter, singlechip system, I~ 2C memorizer, infrared receiver, location inspector, power drive circuit for group of stepper motor, LCD controller, etc..
    该仪器主要包括遥控器(单独使用),单片机系统,I~2C存储器单元,红外接收电路,位置检测电路,成组步进电机功率驱动电路,液晶显示控制等几大部分。
  21. Installed three diffusion reflective infrared sensors at the bottom of the machine, and set another group of infrared emitters in the front, a corresponding set of back-end IR receiver and two ultrasonic sensors at the back.
    在轮式移动机器底部安装3个扩散反射型红外线传感器,另外在前端设置一组红外线发射器,后端设置对应的一组红外线接收器以及2个超声波传感器。
  22. Infrared remote control receiver has been widely used in many aspects of daily life, such as TV, DVD, and many other home and vehicle applications.
    红外遥控接收芯片广泛地应用在日常生活的各个方面,例如电视机,空调,DVD等家用电器以及车载电子产品上。
  23. The program use the infrared sensor module to detected someone who close to car, and then trigger core chip to control the camera acquisition vehicle surrounding image, combined with data collected by the GPS receiver module, record the vehicle information.
    该方案利用红外线感应模块检测到有人靠近汽车,然后触发核心芯片控制摄像头采集车辆周边图像,结合GPS接收模块采集的数据,记录当前车辆基本信息。
  24. Infrared touch screen software system has been developed based on the embedded real-time kernel μ COS-ⅱ. The program mainly contains the task of digital data collection for the analog signal of infrared receiver, the task of coordinate information of computing and the USB data communication.
    红外触摸屏的软件系统是在精简的嵌入式实时内核μC/OS-Ⅱ基础上进行开发的,主要完成了红外接收管信号的数据采集、坐标信息的计算处理、USB通信等任务。
  25. Hardware design includs: DSP peripheral circuits, infrared remote control transmitter and receiver circuits, man-machine interface circuit, Remote control signal circuits, power driver circuit, the current detection, speed detection, location detection, and display circuit.
    硬件部分包括:DSP外围电路、红外遥控发送与接收电路、人机界面接口电路、远程信号控制电路、功率驱动电路、电流检测、速度检测、位置检测及显示电路。